Page 20 - kodascope-b

• 18-Instructions for the operation

Fig. 14
Fig. 14 shows the Kodascope set up and properly threaded,
ready for projecting.
Be sure that the upper and lower loops 27 and 28, a?'(l (({the cor-
rect size. These loops provide slack in the film betwcon the con-
tinuously moving sprocket 25, Fig. 14, and the int.enni Ltently
moving pull-down 58, Fig. 26, page 32. They should l>c formed
as shown in Fig. 14.
The direction switch 31, indicating the direction in which the
film will travel through the Kodascope, must be 1,urnecl to the
word "FORWARD." The still picture lever 32 for projecting
still pictures, must be turned to the word "RUN." The I ver 43
of the rewind mechanism must be down in the posiLion Hhown in
Fig. 14, with the end of the shaft connected to the rewind knob 42,
in position directly above the lever 43, see diagram. 1 f l.hc lever 43
is not in the correct position, bring it there by closing Lholoop guides