Page 21 - kodascope-b

I

of the Kodascope-19
I
20 and 21 by turning the loop guide control lever 22 to the word
"THREAD," then open the loop guides again. The motor is
started and stopped by pushing the motor switch 33 to the word
"ON" or "OFF·" when this switch is at the "ON" •o~ition a
)
)
p
white dot on the switch arm will show.
Self-Threading Feature

Fig. 15
li'irst set up the Koclascope as described on pages 5, 6 and 7,
bringing the upper and lower reel supports 1 and 2 to the positions
Rhown in Fig. 15.
wing down the lens cell 3 to the position shown in Fig. 15.
The end of the pin 19 must fit i,nto the hole provided for this
purpose.