Page 40 - kodascope-b
P. 40
• 38- Instructions for the operation
16
18
33
Fig. 32
If the film should break and a part of it sticks in Lho sprocket,
gate or around the frame of the pull-down mechanism, stop the
motor at once by pushing the motor switch 33, Fig. :32, to the
word "OFF," then remove the film in the following rmtnner:
Unscrew the pin 17, Fig. 32, then pull the pin towards you and
swing up the pin and upper clamp 15 to the position shown in Fig.
33. The end of the pin 17 must be inserted in the hole in the
Kodascope which is provided for the purpose.
Unscrew the pin 18, Fig. 32, then pull the pin towards you and
swing down the pin and lower clamp 16 to the position shown in
II
